Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 72 / 1205

3.3.4 Charging Alternator
General notes
The charging alternator D+ acts as an pre-exciting output during the engine start-up.
During regular operation, it acts as an input for monitoring the charging voltage.
Schematic and terminals
Fig. 23: Charging alternator - wiring
Terminal Description
A 63 Battery B+ (8 to 40.0 Vdc SELV)
B 65 Auxiliary excitation (D+) output
Table 3: Charging alternator - terminal assignment
3.3.5 Voltage Measuring
General notes
Woodward recommends protecting the voltage measuring inputs with slow-acting fuses
rated for 2 to 6 A.
The wide range terminals allow several voltages. The current voltage (range) of the
application must be "told" to the genset controller device. Settings are described in
chapter
╚═▷ “4.6 Configure Measurement” .
NOTICE!
The maximum permissible voltage against ground connected on the easYgen is 300 Volt.
This is to consider if phase voltages are grounded.
72 easYgen-3000XT Series B37574
3 Installation
3.3.4 Charging Alternator
Released