Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 356 / 1205

ID Parameter CL Setting range
[Default]
Description
5523 Load control setpoint
maximum 2 0 to 150%
[100%]
If the maximum generator load is
to be limited, a percentage based
on the rated generator power
(parameter
╚═▷ 1752 ) must be
entered here. The controller
adjusts the generator in such a
manner that this value is not
exceeded. This parameter limits
the setpoint of the load controller
when the generator is in a mains
or island parallel operation.
3465 Min.generator power 1 0 to 100%
[0%]
This is the minimum active power
setpoint. Any lower other active
power setpoint will be ignored!
Notes
For backward compatibility
reasons the default value is zero.
This min. value is also used for the
AnalogManager data sources
╚═▷
“9.4.2 Data Sources AM”
• 05.19 Used P setp. [%] •
and
• 05.20 Used P setp.ramp [%] •
5524 Min.generator
import/export 2 0 to 100%
[0%]
If the minimum generator load is
to be limited, a percentage based
on the rated generator power
(parameter
╚═▷ 1752 ) must be
entered here. The controller will
not permit the load to drop below
the configured load limit value.
This parameter is only functional
when the generator is in a mains
parallel operation.
12940 P control 2 Determined by LogicsManager
86.98
[(04.07& 04.06) & 1]
The LogicsManager can be used to
control whether frequency control
or active power control should be
performed.
If this LogicsManager condition is
TRUE, the active power control is
performed.
356 easYgen-3000XT Series B37574
4 Configuration
4.4.4.5.1 Configure: Load Control (general)
Released