Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 333 / 1205

4.4.4.3.7 Parameters
ID Parameter CL Setting range
[Default]
Description
9924 Load share Interface 2 The interface, which is used for
transmitting the load share data is
configured here.
[CAN ] Use CAN interface 1.
Ethernet A Use Ethernet A interface.
CAN/EthA by LM Use CAN interface 1 but switch to
Ethernet A by TRUE of LM 86.13
(described below).
CAN/Ethernet A Use CAN and Ethernet A
redundant
Off Deactivate load share interface.
11986 LS interface Ethernet
A 2 Determined by LogicsManager
86.13
[(02.01 & 1) & 1]
= 11987
Load share interface switch if
parameter
╚═▷ 9924 is configured
to "CAN/EthA by LM".
TRUE: Use Ethernet A interface
FALSE: Use CAN interface 1
2442 Load share timeout
event 2 [Off] Loadshare timeout events are
disabled.
On Loadshare timeout events are
enabled. If a loadshare message
was not received within a defined
time, a loadshare timeout event
will be shown in the Event History.
5531 Active power load
share 2 [On] Active power load share is
enabled. When multiple
generators are operating in
parallel, the real power is shared
proportionally.
Off Active power load share is
disabled
4522 Active power load
share gain 2 0.01 to 9.99
[1.25]
This parameter defines the impact
of the active power load sharing
error signal on the frequency/load
controller setpoint. The active
power load share gain can be
adjusted between 0.01 to 9.99.
The load controller setpoint is
considered, if an export import
power control to mains is
maintained. With a higher value
the active load sharing has a
higher correction factor in the
regulation.
Notes
This parameter replaces the
former existing weighting factor
on non-XT easYgen (ID 5530). The
default gain 1.25 relates to the
50% value.
333 easYgen-3000XT Series B37574
4 Configuration
4.4.4.3.7 Parameters
Released