Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 302 / 1205

ID Parameter CL Setting range
[Default]
Description
power will be distributed
proportionally among all
generators in relation to their
rated reactive power.
12905 Volt. droop act.
(Voltage droop active)
2 Determined by LogicsManager
86.26
[(08.17 Missing members OR
08.06 GCB fail to open08.06
GCB fail to open) & 1]
= 11605
If this LogicsManager condition is
TRUE, the voltage droop is
enabled.
Example
• Rated reactive power: •
400 kvar
• Rated voltage setpoint: 410 V •
• Droop 5.0%
•
• Reactive power 0 kvar = 0%
•
of rated power
• Voltage is adjusted to (410 V •
– [5.0% * 0.0 * 410 V]) =
410 V.
• Reactive power 400 kvar = •
100% of rated reactive power
• Voltage is adjusted to (410 V •
– [5.0% * 1.0 * 410 V]) =
410 V – 20.5 V = 389.5 V.
Notes
For information on the
LogicsManager and its default
settings see
╚═▷ “9.3.1
LogicsManager Overview” .
12938 Release V-control 2 Determined by LogicsManager
86.97
[(1 & 1) & 1]
= 11926
This LogicsManager is used to
activate generally the voltage
biasing to the sub controller. If the
LogicsManager is false the output
will be on the initial state (see
parameter
╚═▷ 5608 ).
The LogicsManager condition
status 'TRUE' is activating the
voltage or reactive power
regulation according to the
LogicsManager 'V/Q control' ID
╚═▷ 12941 ).
Notes
For information on the
LogicsManager and its default
settings see
╚═▷ “9.3.1
LogicsManager Overview” .
6632 AVR J1939 Device
type 2 [Off] AVR J1939 voltage setpoint is off.
Standard Voltage setpoint for AVR is
transmitted via CAN J1939 SPN
3386 to the AVR.
5494 Volt. SP (J1939) max. 2 100.0 to 150.0%
[105.0%]
This parameter defines the scaling
between the result of "AM Volt. SP
PID-source [%]" and the
transmitted CAN voltage setpoint.
It defines the maximum deviation
of the setpoint from " 5602
Generator rated voltage". Where
302 easYgen-3000XT Series B37574
4 Configuration
4.4.4.1 Voltage Control
Released