Woodward easYgen-3000XT Series, Руководство пользователя, Страница: 1087 / 1205

HMI Text Note
not Off and "87.31 LM: Enable Mns dec." is TRUE
02.45 Mns.release breaker TRUE if mains breaker reconnection is released.
02.46 f dep.power change True if frequency depending up- or derating is active
9.3.2.3 Group 03: Engine control
HMI Text Note
03.01 Auxiliary services TRUE if an auxiliary services prerun or postrun is enabled.
03.02 Starter TRUE if the starter relay is energized.
03.04 Preglow / Ignition TRUE if
Preglow (Diesel engine) or
Ignition (Gas engine) is active.
03.05 Horn True if a new alarm (higher A) is triggered and time (parameter
1756) for horn reset has not exceeded.
03.06 Engine released TRUE if the engine is requested and the start is released.
03.07 Engine delay expired TRUE after expiration of the "delayed engine monitoring" timer
until the fuel relay is de-energized.
03.08 Break. delay expired TRUE after expiration of the Generator Stable Time until the fuel
relay is de-energized.
(Breaker actions are not permitted anymore.)
03.13 Blinking lamp ECU TRUE as soon as the ECU activates the diagnosis light (only
for Scania S6 ECU). This command variable is only active if
remote control of the ECU via easYgen is activated.
03.14 ECU special ignition TRUE as long as a reset or read-out of the Scania S6 ECU
blink code is requested (only for S6 Scania ECU). This command
variable is only active if remote control of the ECU via
easYgen is activated.
03.15 ECU seq. B_OUT_1 This flag is for special ECU indications:
03.16 ECU seq. B_OUT_2 This flag is for special ECU indications:
03.17 ECU seq. B_OUT_3 This flag is for special ECU indications:
Scania S8: "Power Lost Due to High Temperature"
03.18 ECU seq. B_OUT_4 This flag is for special ECU indications:
Scania S8: "Low Urea Level"
03.20 Governor raise TRUE if the "Three Position Controller Frequency / Active Power" raise pulse is
active.
1087 easYgen-3000XT Series B37574
9 Appendix
9.3.2.3 Group 03: Engine control
Released