Model D3304
Compact Super Heavy-Duty
Workbench Leg System
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
Introduction
This Heavy-Duty Workbench Leg System features
square-column steel legs with adjustable foot
pads and steel cross braces for unparalleled
strength and stability.
COPYRIGHT © AUGUST, 2016 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China
#18308DN
Inventory
A. Leg ............................................... 4
B. Brace with Label............................... 2
C. Brace ............................................ 2
D. Adjustable Foot ................................ 4
E. Hex Bolt M12-1.75 x 25 ..................... 16
F. Lock Washer 12MM .......................... 16
G. Flat Washer 12MM ........................... 16
Assembly
We recommend having an assistant hold the
pieces while you assemble the parts. Do not
final-tighten stand bolts until all components
have been assembled.
Specifications
• Size (without top) ....... 32"H x 26"W x 26"D
• Lower Shelf Depth ..........................
3
⁄
4
"
• Max. Weight Capacity ............... 4000 lbs.
Figure
2
. Completed leg assembly.
x 16
To assemble workbench:
1. Attach legs to each side of each brace with
label, ensuring ledges point up. Each set of
pre-drilled holes is attached with a hex bolt,
lock washer, and flat washer (see
Figure 2).
2. Attach remaining braces to legs (as shown
in
Figure 2).
Figure
1
. Completed leg assembly.
Leg
Brace
Brace
with
Label
Figure 3. Completed workbench.
3. Final-tighten all bolts.
4. Install adjustable feet into bottom of
each leg. Once table top is installed, feet
can be further adjusted for stability (see
Figure 3).
Foot