WOOD'S POWR-GRIP MRTALP Series, Инструкция по эксплуатации, Страница: 39 / 46

Rev 12.3/1-17 37 MRTALP6-DC: #35056
REPLACEMENT PARTS LIST
Stock No. Description Qty.
93221 Vacuum Pump – Diaphragm Type – 2.5-SCFM [71 liters/minute] – 12 V DC (Dynaflo) 1
66197BM Dynaflo Pump Gasket & Flap Valves 2
66197AM Dynaflo Pump Diaphragm Kit 2
66197AA Dynaflo Pump Dual-Head Assembly 2
65442CA Vacuum Hose – 1/4" [6.3 mm] OD – Red (approx. 120" [305 cm] in length) 1
65442AM Vacuum Hose – 1/4" [6.3 mm] ID x 48" [122 cm] Length – Coiled – Green 3
65441 Vacuum Hose – 1/4" [6.3 mm] ID x 48" [122 cm] Length – Coiled – Red 3
65439AM Vacuum Hose – 5/32" [4.0 mm] OD – Red (approx. 25" [64 cm] in length) 1
65439 Vacuum Hose – 5/32" [4.0 mm] OD – Blue (approx. 25" [64 cm] in length) 1
65429 Vacuum Hose – 1/4" [6.3 mm] OD – Blue (approx. 200" [508 cm] in length) 1
65211 Check Valve – 1/8 NPT 2
65014 Pad Spring – Wave Type (for HV11 pad) 6
65010 Pad Spring – Coil Type (for G3370, VPFS10T & G0750 pads) 6
64834 LED Indicator – 12 V DC – Green (aka, vacuum lift light) 1
64832 LED Indicator – 12 V DC – Blue – Small (aka, power light) 1
64752 Audio Alarm – 5-15 V DC – Panel Mount 1
64713AM Battery Charger – 7 Amp – 240 V AC – Australian Type (optional) 1
64712AM Battery Charger – 7 Amp – 100 / 120 V AC (optional) 1
64711AM Battery Charger – 7 Amp – 240 V AC (optional) 1
64707AS Battery Charger – 0.6 Amp – 240 V AC – Australian Type 1
64706AZ Battery Charger – 1 Amp – 240 V AC 1
64702AM Battery Charger – 1 Amp – 100 / 120 V AC 1
64682 Battery – 1.5 V DC – AA Alkaline (for optional radio transmitter) 2
64665 Battery – 12 V DC – 18 Amp-Hours (optional) 1
64664 Battery – 12 V DC – 7 Amp-Hours 1
64590 Battery Gauge 1
64460 Circuit Breaker – 15 A 1
64453CT Circuit Board – Populated 1
64272 Strobe Light – 12 V DC – Amber (optional) 1
64273 Strobe Light – 12 V DC – Red (standard with MRTALP6FS10TDC) 1
64238AA Vacuum Switch – Digital 2
64233 Power Switch 1
64213 Push-Button Switch – Chrome (for apply, enable, and release buttons) 3
64199 Push-Button Switch – Red (for battery test button) 1
59028 Movable Pad Mount – 2-1/2" [63.5 mm] Tubing Size 6
57389 Remote Control System Retrofit Kit (optional) 1
54392 Battery Connector – Twin Lead 1
57340 Battery Connector – Twin Lead (for optional 18 amp-hour battery) 1
53122 Pad Fitting – Elbow – 5/32" [4.0 mm] ID 6
49724TT Sealing Ring Insert – Model VIFS10T2 – Closed Cell Foam (for VPFS10T pads) 6
49724LT Sealing Ring Insert – Model VIFS10T1 – Low-Marking Rubber (for VPFS10T pads) 6
49672T Vacuum Pad – Model VPFS10T / 10" [25 cm] Diameter – w/Replaceable Sealing Ring 6