INSTRUCTIONS
BEFORE YOU PROCEED
Read through instruction booklet entirely. Comply with all operating instructions. Failure to follow instructions could result in
damage to the product or personal injury. Do not modify or tamper with any electronic components. Combine products from
the Just Plug Lighting System only, unless otherwise instructed.
Save these instructions.
GETTING STARTED
The Just Plug Lighting System is made up of
Ports, Plugs and Cables. This simple connection system makes it quick and
easy to light one building or an entire city.
How to Connect a Plug to a Port
Align locking tabs on Plug with front of Light or Expansion Hub. Insert Plug into Hub Port until locking tabs click into place.
(Fig. 1)
How to Remove a Plug from a Port
Grasp top edge of Plug and pull firmly.
LIGHTS & HUB SET / LIGHT HUB
Light Hubs supply power to Just Plug LED Lights.
• To power Light Hub, insert Power Supply (JP5770) plug into
POWER IN Port (or use a 16VAC train power pack, Fig. 5).
• Do
NOT remove CTRL Port Plug (unless using Auxiliary Switch (JP5725) or connecting to DCC).
• Plug LED Lights (JP5736-JP5749, JP5754, JP5755) into
LIGHT Ports. Lights & Hub Set includes two Stick-On Lights. To
secure Lights in building, remove release paper from back of LED and stick on where desired.
• Rotate Dimmer Controls to adjust light brightness (adjusts from very bright to off).
• Use dedicated spaces on front of Hub to label according to your lighting configuration.
• To mount Hub, use included Tape or Screws.
EXPANSION HUB
Connect Light Hubs to Expansion Hub to expand your lighting system.
• To power Expansion Hub, insert Power Supply (JP5770) plug into
POWER IN Port (or use a 16VAC train power pack, Fig. 5).
• Do
NOT remove CTRL Port Plug (unless using Auxiliary Switch (JP5725) or connecting to DCC).
• Use included Connecting Cables to connect to Light Hubs
(Fig. 2), another Expansion Hub (Figs. 3 and 4), train power
pack
(Fig. 5) or DCC relay unit (Fig. 6).
• Use dedicated spaces on front of Hub to label according to your lighting
configuration.
• To mount Hub, use included Tape or Screws.
CONNECTING HUBS TOGETHER
Use Connecting Cables (included with Expansion Hub)
Connect Light Hub to Expansion Hub
Insert Connecting Cable Plug into Expansion Hub
HUB Port and opposite
Plug into Light Hub
POWER IN Port (Fig. 2).
Connect Expansion Hub to Expansion Hub
Insert Connecting Cable Plug into
POWER OUT Port on powered
Expansion Hub. Insert opposite Plug into
POWER IN Port on add-on
Expansion Hub (
Fig. 3). Keep expanding your lighting system (Fig. 4).
Power Hubs from a Train Power Pack
Cut off one Connecting Cable Plug with wire cutters and strip
approximately 1" of wire. Connect bare wires to the accessory terminals
on a 16VAC power pack. Insert Plug on other end of Connecting Cable
into Hub
POWER IN Port. (Fig. 5)
Control Just Plug Lighting System with DCC
Cut off one Connecting Cable Plug with wire cutters and strip
approximately 1" of wire. Connect bare wires to DCC relay unit (follow
DCC manufacturer instructions for proper installation of wires). Insert
Plug on other end of Connecting Cable into Hub
CTRL Port. (Fig. 6)
1 2 3
4
1
Power
Supply
EXPANSION HUB
Connecting Cable
CTRL
Port
Plug
HUB
Ports
Ports
Locking
Tabs
Plug
Fig. 1
1 2 3 4
1
5
2
IN OUT CTRL
POWER
HUB
EXPANSION HUB
No.
WOODLAND SCENICS
DIMMER CONTROLS
IN CTRL
1
2
3
4
POWER
LIGHT
LIGHT HUB
No.
WOODLAND SCENICS
1a 1b 1c 1d
1
2a 2b 2c 2d
2
3a 3b 3c 3d
3
4a 4b 4c 4d
4
5a 5b 5c 5d
5
Fig. 4
Keep
Expanding
1a 1b 1c 1d
1
Power
Supply
LED
Stick-On
(or Nano)
CTRL
Port
Plug
Light Ports
Dimmer Controls
LIGHT HUB
Fig. 2
Connecting Cable
Power
Supply
Cable
Fig. 3
Connecting Cable
Power
Supply
Cable
Fig. 5
Train
Power
Pack
DIMMER CONTROLS
IN CTRL
1
2
3
4
POWER
LIGHT
LIGHT HUB
No.
WOODLAND SCENICS
DIMMER CONTROLS
IN CTRL
1
2
3
4
POWER
LIGHT
LIGHT HUB
No.
Connecting
Cable
Fig. 6
DCC
Relay Unit
Connecting
Cable
LIGHTS HUB - JP5701
WOODLAND SCENICS
®
PO Box 98, Linn Creek, MO 65052 • woodlandscenics.com
RoHS Compliant
Combination Package
Developed in USA
Made in China
G11
©2014 O CO
Model building item, not a toy! Not intended for children
under 14 years! / Modellbauartikel, kein Spielzeug! / Article de
modélisme. Ceci n’est pas un jouet. / Articolo di modellismo,
non è un giocattolo! / Artículo para modelismo ¡No es un
juguete! / Artigo para modelismo. Este artigo não é um
brinquedo! / Výrobek určený pro modeláře, nejedná se o
hračku! / Modelbouwartikel, geen speelgoed!
CAUTION:
Do not look directly into LED lights when in operations.
