woodize.com
Explanations of the parameter settings menu:
00 - The software version of the clock. Can not be changed!
01 - The time format. Set 24 Hrs format if you like to see afternoon for example 17:35, set 12 Hrs
format if you like to see for example 5:35 PM.
02 - Date format of the current date.
03 - When the displays are showing a single digit, for example 8 o'clock at the morning, the tubes
are not showing the "0" digit beside of the "8" character.
04 - The hour when the clock activate the "Night Mode" settings. The tubes are go OFF or dimmed,
based on your settings, and the color e
ff
ect lights are switch to dimmed or to the given value
which is set in the “night Mode”. Can not be the same as the parameter 05.
Night mode saves energy!
05 - The hour when the "Night Mode" ends. Can not be the same as parameter 4
06 - De
fi
ne what the Nixie tubes do during night mode. If OFF than they are dark, when ON, the
parameter 07 value takes e
ff
ect. (Dimmed by default)
07 - The brightness o
ff
the nixie digits during "Night mode"
08 - The brightness o
ff
the nixie digits during "Day mode"
09 - Reserved for later use
10 - If the tubes are OFF during “Night Mode”, the clock will show you the current time for the
given seconds long what you have set here, when the ADJUST button is pressed once.
11 - If this parameter value is "0" the alarm is disabled, no alarm will goes o
ff
, even if its set.
If it set to "1", the daily alarm repeat can be set.
12 - Snooze repeating period. "0" is o
ff
, no snooze after the
fi
rst alarm goes o
ff
. "1" when the alarm
repeat in every 5 minutes, "2" for every 10 minutes, "3" for every 15 minutes and "4" every 20
minutes. The snooze repeat the alarm 4 times then it switches OFF for that day.
13 - Dot lights are not applicable on this clock.
14 - Dot lights are not applicable on this clock.
15 - If its “0” the clock will not show the date automatically. If its “1” , the date will show
automatically in every 1 minutes, if its ”2”, in every 10 minutes, if its “3”, then in every hour.
16 - When the date is shown, the color of the lamina lights can be set to di
ff
erent color than the
current color. When its ON the color of the lamina will change, if its OFF, nothing happens
when the date shown automatically.
