Wooden-Gear-Clocks Crescent, Руководство пользователя

Страница: 17 / 45

16
4) Sand the pendulum bracket (#32) and glue it into the upper pendulum shaft, with the screw tips
pointing toward the lower portion of the pendulum.
5) Lay the pendulum shaft on top of the crutch arm (assembled previously), aligning the two predrilled
pilot holes. Attach the crutch arm to the pendulum shaft with a #4 x ½" screw. The screw should be
tight enough to hold the crutch arm in place (the exact position will be adjusted later).
5) Flip the pendulum shaft over and rest it on the back side of the pendulum bob (assembled
previously). Attach the shaft with the thumbscrew engaged with the t-nut in the bob. Tighten snugly
enough to keep the bob in place (the exact position will be adjusted later).
6) Apply finish to the pendulum unit.