10
Circular Grill–1500
Installation and Operation Manual
An ongoing program of product improvement may require us to change
specifications without notice.
WS-LHPCGG-D-1500-C Circular Grill,
Revised June 2015. Doc no: M0017.01
or visit
woodstone-corp.com
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free 800.988.8103
Tel 360.650.1111
Fax 360.650.1166
UTILITY INFORMATION
UTILITY CONNECTIONS
NOTE:
This unit is on casters, so utility hookups should be made in such a way as to allow mobility of the grill for service and
maintenance purposes�
All connections to the rotisserie are made from the bottom of the unit.
The installation of this appliance must conform with local codes, or in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 or the Natural Gas Installation Code, CAN/CGA-B149.1 as applicable including:
The appliance and its individual shutoff valve (supplied by others) must be disconnected from the gas supply piping
system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.45 kPa).
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve (supplied
by others) during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi
(3.5 kPa).
Wood Stone recommends that the appliance’s individual shutoff valve (supplied by others) be left readily accessible� Wood Stone
also recommends that inspection and maintenance of the burners and gas piping connections of this appliance be performed at
regularly scheduled intervals and only by professional gas appliance service agencies�
