Setup & Operation
Assembly
Setup & Operation
PGdoc031914
2-2
2
Blade Support Arms
See Figure 2-2.
Install a rubber bumper to each rear arm bracket with a provided #8-32
slotted hex head screw and self-locking hex nut.
Install the left and right arm brackets to the rear of the grinder frame using two 1/4-20 x 1”
hex head bolts, lock washers and flat washers per bracket.
Install a wear tube and 2 1/2” washer and thread a 24” pipe into the threaded hole on
each rear arm bracket. Install a 1/2” NPT coupler fitting to each pipe and install a second
24” pipe to each coupler.
FIG. 2-2
Left Rear Arm
Bracket
Right Rear
Arm Bracket
24" Pipe (4)
1/2" NPT Pipe
Coupler (2)
Rubber Bumper
#8-32 Self-
Locking Nut
1/4-20 x 1" Hex
Head Bolt, Lock
Washer & Flat Washer
PG0010-2
#8-32 x 3/4"
Slotted Hex
Head Screw
Wear Tube
2 ½" Washer
