Setup & Operation
Assembly
2
2-9
PGdoc031914
Setup & Operation
Electrical Connection
Plug the power cord from the control box into a grounded 110-120 volt GFI receptacle.
DANGER!
For the user's safety, the power cord on this
product has a grounded plug. This power cord should only
be used with correctly grounded (3-hole) receptacles to
avoid electrical shock. To prevent electrical shock hazard,
this unit must be connected to a GFI (Ground Fault Inter-
rupter). The National Electrical Code, Article 680-41(A),
requires a GFI be installed in the branch circuit supplying
fountain equipment rated above 15 volts. See your local
electrical supply dealer for various brands of GFI's.
CAUTION!
Do not run the pump until it is under oil. Dry
operation will damage the pump!
NOTE:
The power cord provided is for use with 110V con-
figurations only. If your grinder is 220V, use an adaptor plug
or modify the power cord with the appropriate plug to match
your 220V receptacle.
