SETUP & OPERATION
Planning / Thicknessing
3
3-8
EGdoc052521
The
thicknessing
depth is adjusted with the crank (J). The set thickness can be read on the
scale (K). The thicknessing depth can be adjusted from
0.3 mm to 4 mm
. The maximum depth
can be set for the material width
not bigger than 160 mm
. Always measure the material and
adjust the height before thicknessing.
See figure 3-7.
FIG. 3-7 MP180
Bottom Table
Height Scale (K)
Bottom Table Height
Adjustment Crank (J)
