Wood-mizer MP160, Руководство пользователя

Страница: 5 / 42

INTRODUCTION
INTRODUCTION doc121819 1-1
1
SECTION 1 INTRODUCTION
Congratulations on your purchase of a Wood-Mizer Planer - Moulder!
Wood-Mizer is committed to providing you with the latest technology, best quality, and strongest
customer service available on the market today. We continually evaluate our customers’ needs to ensure
we are meeting current wood-processing demands. Your comments and suggestions are welcome.
Wood-Mizer is committed to providing you with the latest technology, best quality, and strongest
customer service available on the market today. We continually evaluate our customers’ needs to ensure
we are meeting current wood-processing demands. Your comments and suggestions are welcome.
Wood-Mizer is committed to providing you with the latest technology, best quality, and strongest
customer service available on the market today. We continually evaluate our customers’ needs to ensure
we are meeting current wood-processing demands. Your comments and suggestions are welcome.
This documentation includes information on preparing the planer/moulder for operation and operating,
servicing and repairing the machine.
GENERAL
Check your planer/moulder as soon as you receive it. Report any transport damage to the transport
company immediately.
Lift the planer/moulder using a forklift or pallet jack with lifting capacity of minimum 500kg.
When replacing spare parts, use only original parts and note that anything electrical must be assembled
by a qualified electrician.
APPLICATIONS
The planer/moulder can be used for planing/moulding/thicknessing and planing wood, chipboard, board,
etc.
Hard materials such as chipboard, teak, MDF, etc. require hard carbide tools.
The planer/moulder is designed for indoor use, with temporary outdoor use during good weather.
REQUIREMENTS
Planer/moulder can be used in rooms with temperature range from -15
o
C to +40 C. Ventilation must be
mechanical and in accordance with standards.
The planer/moulder must be connected to a dust extractor. Dust extractor must be turned on when the
machine is working.
SAFETY DISTANCE