Introduction
Specifications
1
1-3
WMDKdoc020322
Introduction
1.3
Specifications
See Table 1-1.
Specifications for the kiln electric equipment are shown below.
See Table 1-2.
For example for standard power specification 20’ Chamber or Container
Kiln see the table below.
Model No.
WMDK
Kiln Module Power
2.1 kW
4.1 kW (high power module)
Power Consumption (one
module)
2.3 kW/h
4.3 kW/h (high power module)
Single Fan Power
65W
Exhaust Fan Power
145 W
290W (two fans required for high power modules)
Voltage Requirement
3x400V 50Hz
1
1
NOTE:
The WMDK Kiln System requires a 3x400V AC supply with a switched waterproof
IP65 isolator with current rating shown in the table below.
Operating Temperatures
0°C - 60°C (32°F - 140°F)
TABLE 1-1
Model No.
WMDK
No. of Fans
8 required for 20’ Container/Chamber (4 modules)
Power Consumption (one
module)
2.1 kW
Total Power Requirement
8,7 kW
Voltage Requirement
3x400V 50Hz
1
1
NOTE:
The WMDK Kiln System requires a 3x400V AC supply with a switched waterproof
IP65 isolator with current rating shown in the table below.
CAUTION!
The fans can work at temperatures not exceeding 60
o
C
Operating Temperatures
0°C - 60°C (32°F - 140°F)
TABLE 1-2
Содержание MK20-2
