Operation
Temperature Controller
Operation
WMDKdoc020322
4-8
4
4.6
Temperature Controller
See Figure 4-4.
The kiln temperature controller is shown below.
1. Temperature Setting
Press the
S
key and hold it until
”SP1”
appears on the display;
Release the
S
key; the set temperature value will be shown;
Using the
UP
and
DOWN
key, set the desired temperature value;
To finish setting and store the change, press the
S
key.
2. Keyboard Locking
To prevent the controller from any undesirable setting change:
Simultaneously press the UP and DOWN keys for 5 seconds;
Set the
HP
parameter to 1;
To finish locking the keys, wait 30 seconds without pressing any key.
When the keys are locked and you try to modify any controller parameter, ”
PA”
is shown
on
the display.
3. Keyboard Unlocking
Simultaneously press the
UP
and
DOWN
keys for 5 seconds;
Press the
S
key;
FIG. 4-4
Содержание MK20-2
