User Manual
Model No.:DS-988
Listening to your iPod/iPhone/MP3
1.. Plug the AC adaptor into the DC in port at the rear of the base
, then into a power supply. And put the battery into the compartment of the speaker.
2.Connect 3.5mm audio cable which located on the base to the audio output port of an
auxiliary audio device (iPod /MP3,PC,CD player,etc)
3.Press both of the power button on the base and speaker to turn the unit on.
4.Press MP3 button on the speaker to turn to the audio mode.
5..Press corresponding“ channel” button1/2/3 both on the top of the base and right hand of the
speaker until it receives the right signal.
Noted:The unit would default to be channel 1 when at the beginning.
4. Use “” or “VOLUME-” on the right hand of the unit to adjust to a proper volume
level,
5.Press the PLAY/PAUSE button on your iPod/iPhone to playback,press again to pause play.
Charging for the battery
1.
Put recharging battery into the compartment of the base.Make sure it fit the two charging
contact points well.Then the indicator turned to be green to show the status of charging and
turned to be red when full charged.
Noted:The indicator will be only on when the battery have been put into the recharging area of the
base.
Using LED clock
Press the button on the bottom of the speaker to turn the LED on and after 3 seconds will auto off.
Setting clock time
