Diagram 5.5
-
1
5.5
LoRaWan
-
LR100 only
The LoRaWan Setting page I sonly for Device which is supports LoRaWAN protocol
-
LR100 series. It is not available for LM100 and LC100 series.
The LR100 series support 2 communication mode with LoRaWAN Gateway – ABP and
OTAA modes. The LR100 series only supports 1 communication mode, either ABP or
OTAA. The communication mode should be same as the LoRaWAN Gateway.
Before setting those parameters, you have to prepare LoRaWan gateway that LR100 is
going to connected.
For example, the diagram 5.5
-
2 and diagram 5.2
-
3 show the LoRaWan Server configure
WEB UI of WR322
-
EC
-
LoRaWAN in ABP mode and OTAA mode.
Select ABP or OTAA mode, and Click “Enable”, fill
-
in the parameters that gets from
LoRaWAN Gateway and Click “Write” to write new setting to LR100, “Read” to get
current setting.
The LR100 communication with WR322
-
EC
-
LoRaWAN in OTAA mode, the App_eui is
not necessary. But, for the other brand of LoRaWan Gateway, it may need fill
-
in
App_eui information.
The parameters of ABP and OTAA should be generates by LoRaWan Gateway, refers the
diagram 5.5
-
2, 5.5
-
3. By click the “Generation” to generate that information.
