Quick Installation Guide
DP208
Industrial 8-port PoE Switch
DS208
Industrial 8-port Ethernet Switch
DP208 is an unmanaged industrial 8-port Full-Giga Ethernet switch,
delivering 8 port PoE 802.3af/at. The rugged IP40 design can stand for
harsh environment and wide temperature (from -40 to 70
°
C) use. The
compact size can fit in for space limited cabinets. The unmanaged 8-
port Full-Giga Ethernet switch DP208 is designed to accept wide power
input range from 46 to 57 VDC and DS208 is from 9.6 to 60VDC. DP208
and DS208 are complying with heavy indsutrial EMC standard. Both
DP208 and DS208 have power saving design for Efficient Power
Management.
・
Overview
1 x Product Unit
1 x 4-pin Removable Terminal Connector
1 x Attached Din Clip
1 x Quick Installation Guide
Optional Accessory (for detailed information please refer to the
Datasheet)
・
Package Checklist
www.womaster.eu
DIN Rail mount
To mount the switch on the DIN Rail
track, insert the upper end of the
DIN
‐
Rail clip into the back of the
DIN
‐
Rail track from its upper side and
lightly push the bottom of the DIN
‐
Rail
clip into the track. The DIN Rail should
comply with DIN EN50022 standard.
Using wrong DIN rail may cause unsafe
installation.
Wiring the Power Inputs
1) Insert the positive and negative wires
into 3 pin V+, V- and V+ contact on the
terminal block connector.
2) Tighten the wire-clamp screws.
3) Connect the power wires to suitable
DC Switching type power supply. The
input DC voltage should be in the power
input range.
DP208:
48/54 VDC (46~57VDC,
50~57VDC suggested for IEEE802.3at)
DS208:
12/24/48 VDC (9.6~60VDC)
Wiring the Grounding
For avoiding system damage by noise
o r electric shock, establish a direct
connection by insert the grounding wire
into the GND contact on the terminal
block connector, then tighten the wire-
clamp screws.
Model Name
Description
DP208
Industrial 8G Unmanaged PoE Switch
DS208
Industrial 8G Unmanaged Ethernet Switch
・
Installation
・
Appearance
DP208
DS208
LED
Status
Description
Power
Green On
DC-IN Power is On
Off
No Power in DC-IN
Ethernet
(Port 1-8)
Green On
Links established
Green Blinking
Packets transmitting/receiving
Green Off
Link is inactive
PoE LED
1~8 (DP208)
Amber On
PoE delivering in progress
Off
PoE is not delivering
LED indication
Gigabit Ethernet with PoE
・
8-port 100/1000MBase-T
, IEEE 802.3 af/at PoE
・
LINK/ACK LED
・
PoE LED
Power Connector
・
1 x 4 pin terminal block
3 pin for power input
1 pin Ground
Power LED
DIN Clip
Gigabit Ethernet
・
8-port 100/1000MBase-T
・
LINK/ACK LED
Power Connector
・
1 x 4 pin terminal block
3 pin for power input
1 pin Ground
Power LED
DIN Clip
Turn off DC power input source before connecting the DC Power
supply module to the terminal block connectors. Do not turn-on the
source of DC power module and make sure all connections were well
established, then power on the DC source to powering the Switch
device.
Never install or work on/with the equipment or the cabling during the
period of lightning activity.
The DIN Rail should comply with DIN EN50022 standard. Using
wrong DIN rail may cause unsafe installation.
・
Safety Precautions
