~
128
~
A
R
INSE AID CONTAINER
B
L
OCKING LEVER
C
F
LAP OF THE RINSE AID CONTAINER
4.2.2 Setting of the rinse aid consumption
❖
To achieve a better drying performance, the rinse aid consumption can be set
individually.
Five consumption levels can be selected (D 1 - D 5). The higher the consumption
level, the higher the rinse aid consumption:
a.
D 1 = lowest rinse aid consumption.
b.
D 2 = low rinse aid consumption.
c.
D 3 = medium rinse aid consumption.
d.
D 4 = high rinse aid consumption.
e.
D 5 = highest rinse aid consumption.
If water drops or scale marks are on your dishes after cleaning,
increase
the
amount of rinse aid.
If whitish stripes are on glasses or bluish film is on the cutlery after cleaning,
decrease
the amount of rinse aid.
S
TEP
1:
ENTER RINSE AID SETTING MODE
1.
Open the door.
2.
Switch on the appliance using the « O
N
/ O
FF
» -
BUTTON
(s. chapter 3.2
C
ONTROL PANEL
:
OPERATING BUTTONS AND INDICATORS
).
3.
Within 60 seconds
after you have switched on the appliance, press and
hold
the
« P
ROGRAMME
» -
BUTTON
(s. chapter 3.2 C
ONTROL PANEL
:
OPERATING
BUTTONS AND INDICATORS
)
for longer than 5 seconds
.
4.
Then press the « D
ELAY
» -
BUTTON
once
to activate the rinse aid setting mode.
5.
The indicator of the rinse aid «
»
flashes.
6.
The appliance is now in rinse aid setting-mode.
7.
The display indicates the current status of the rinse aid consumption: e. g.
consumption level « D 4 ».