~
125
~
S
TEP
1:
ENTER WATER SOFTENER SETTING MODE
1.
Open the door.
2.
Switch on the appliance using the « O
N
/ O
FF
» -
BUTTON
(s. chapter 3.2
C
ONTROL PANEL
:
OPERATING BUTTONS AND INDICATORS
).
3.
Within 60 seconds
after you have switched on the appliance, press and
hold
the
« P
ROGRAMME
» -
BUTTON
(s. chapter 3.2 C
ONTROL PANEL
:
OPERATING
BUTTONS AND INDICATORS
)
for 5 seconds
.
4.
The appliance is now in water softener setting-mode.
5.
The display indicates the current status of the water softener consumption: e. g.
water softener level « H 3 ».
S
TEP
2:
SETTING OF THE WATER SOFTENER CONSUMPTION
1.
To select the proper water softener consumption setting according to your local
requirements, press the « P
ROGRAMME
» -
BUTTON
repeatedly
until the display
indicates the desired water softener level (H 1 - H 6).
2.
Each press of the « P
ROGRAMME
» -
BUTTON
changes the consumption setting
by one level. The settings are consecutive: H 1 → H 2 → H 3 → H 4 → H 5 →
H 6 → H 1.
Water softener (= dishwasher salt) is added to a running programme by the
appliance
automatically
. When and how much water softener the appliance adds
to a running programme
depends on
the individually set water softener level
(H 1 - H 6); s. relevant table in chapter 4.1.2
W
ATER HARDNESS LEVELS
/
WATER
SOFTENER CONSUMPTION
.
S
TEP
3:
EXIT WATER SOFTENER SETTING MODE
➢
Press the « O
N
/ O
FF
» -
BUTTON
to save the water softener consumption setting
and exit the setting mode.
4.2 Rinse aid
❖
Your appliance is designed for using rinse aid. The rinse aid is added automatically
during operation and supports the spot-free and perfect drying of the dishes.
❖
The rinse aid container is inside the appliance near the dishwasher detergent
container.
❖
Max. capacity of the container: approx. 140 ml.
❖
Do not overfill the container; otherwise, severe foam formation may occur.
❖
Do not forget to close the flap of the rinse aid container after refilling.
