Wolkenstein SBS490NFWD IXK, Инструкция по эксплуатации

Страница: 100 / 108

101
3. Ensure that the sealing ring is seated properly
( B ).
4. Install the water tank on the door. Ensure that
the sealing ring has been inserted into the
appropriate opening before. Hold both sides
of the water tank tightly. Insert the water valve
into the appropriate opening and install the
water tank at an angle of 45 0 .
5. Place the water tank in proper position by pushing it downwards slightly and
carefully until the water tank is seated properly in the door of the appliance.
6.3 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent
person only . If the LED-illuminant is damaged, please contact a qualified
professional ( not covered by the guarantee ).
NOTICE! This product contains a LED light source of energy efficiency
class G according to EU-Regulation 2019/2015.