32
immediately.
7
3.
If gas is set free at the installation site:
a)
Open all windows.
b)
Do not
unplug the appliance and
do not
use the control panel or
thermostat.
c)
Do not
touch the appliance until all the gas has gone.
d)
Otherwise sparks can be generated which will ignite the gas.
4.
Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the
appliance.
5.
Do not install the appliance near of volatile or combustible materials
(e.g. gas, fuel, alcohol, paints) and in rooms which may have poor air
circulation (e.g. garage).
6.
EXPLOSION HAZARD!
Do not store any explosive materials or
sprays, which contain flammable propellants, in your appliance.
Explosive mixtures can explode there.
7. While unpacking, the packaging materials (polythene bags,
polystyrene pieces, etc.) should be kept away from children and pets.
CHOKING HAZARD! RISK OF INJURY!
8. Always observe the required minimum distances for proper
ventilation.
9. Air circulation around the appliance
must
be ensured. The appliance
may only be installed and operated at a distance of
at least 100 mm
to other objects.
10. Install the appliance in a dry and well-ventilated place. The
installation room must have a floor area of at least 4 m
2
to ensure
adequate ventilation if the cooling system is damaged.
11. Do not connect the appliance to the electric supply unless all
packaging and transit protectors have been removed.
12. Operate the appliance with 220~240V/50Hz/AC only. All
connections and energy-leading components must be replaced by an
authorised professional.
13. Do not connect the appliance to an energy saving plug (e.g. Sava
Plug) and to inverters which convert direct current (DC) into
alternating current (AC), e.g. solar systems, power supply of ships.
14. Do not use a socket board or a multi socket when connecting the
appliance to the mains.
15. Never place portable multiple sockets or portable power supplies
behind the appliance. RISK OF FIRE!
16. A dedicated and properly grounded socket meeting the data of the
plug is required to minimize any kind of hazard. The appliance must
be grounded properly.
7
Depending on model.