wolke m600 basic, Руководство оператора

Страница: 74 / 166

4-20 Password Protection Rev AB
Wolke m600 touch Operator Manual
The following parameters can be accessed in this page.
• Internal: Shows the job stored in the printer.
• Capacity: Shows the details of available files and available storage.
• External: Shows that the external USB memory is connected to the
printer.
Password Protection
Password protection on the user interface allows different protected
access levels for the various operational features. During installation, you
can set the standard or advanced password selection using CLARiTY
®
Config Manager. Refer to Wolke m600 touch Service Manual (Part
Number: WLK462325).
Note : If you do not want to have password protection, you can select “None”
option.
Password control can be set up as per the user requirement. When the user
tries to access a function that is password protected the user interface
prompts the user to enter the password.
When the correct password is entered, that function or menu becomes
available. The password level remains active until logged out by the user
or timed out.
• Standard Passwords: For example, if the Diagnostics function is
password protected, when the user accesses the Diagnostics Menu by
navigating to Tools > Diagnostics , CLARiTY
®
prompts the user to enter
the password.
• Advanced Passwords: The user is prompted to select the required
username and enter the associated password.