7-4 Recovering Nozzles/Purge Nozzles
Rev AB
Wolke m600 touch Operator Manual
Recovering Nozzles/Purge Nozzles
Depending on the type of ink used, the ink may dry on the nozzle plate of
the cartridge if not used for some time. This is very much dependent on
ambient conditions (air temperature, air humidity). The
Purging
function
helps to improve such sticking characteristics after the printer has not
been used for a while. This is done by purging out a few drops of ink
before the actual printing process begins.
To purge the printheads when not in production
To purge the printheads, proceed as follows:
1
On the Home page, navigate to
Tools
>
Setup
.
2
On the Setup page, touch
Consumables
.
3
On the
Consumables
screen, touch the required Printhead. For example
if you want purge the first Printhead touch
Purge
Printhead 1
.
Follow the on-screen instructions to complete the operation.
Figure 7-3: Purge Printhead
Содержание m600 basic
Страница 1: ...Wolke m600 touch Operator Manual P N WLK462324 01 Revision AB March 2013...
Страница 75: ...Rev AB Password Protection 4 21 Wolke m600 touch Operator Manual Figure 4 22 Password Screen...
Страница 153: ...9 2 Technical Drawings Rev AB Wolke m600 touch Operator Manual Printhead Red Figure 9 2 Printhead Dimensions...
Страница 155: ...9 4 Technical Drawings Rev AB Wolke m600 touch Operator Manual Sensor Figure 9 5 Sensor Dimensions...
