6-32 Production Audit Log
Rev AB
Wolke m600 touch Operator Manual
Production Audit Log
The production audit log shows the log of machine changes and user
changes made.
Note:
Production Audit Log is turned off by default and needs to be activated in
Clarity Configuration Manager. The logging mode can be set to “None”,
“Normal” or “Advanced”.
Navigate to
Tools
>
Diagnostics
>
Control
.
Note:
‘Production Audit Log’ appears in the menu when the logging mode is set
to either ‘Normal’ or ‘Advanced’.
In Normal logging mode, the log entries are deleted if there are over 500
log entries and older than 90 days.
In Advanced logging mode, entries must be archived to a USB stick before
logs will be deleted.
Figure 6-40: Production Audit Log
Содержание m600 basic
Страница 1: ...Wolke m600 touch Operator Manual P N WLK462324 01 Revision AB March 2013...
Страница 75: ...Rev AB Password Protection 4 21 Wolke m600 touch Operator Manual Figure 4 22 Password Screen...
Страница 153: ...9 2 Technical Drawings Rev AB Wolke m600 touch Operator Manual Printhead Red Figure 9 2 Printhead Dimensions...
Страница 155: ...9 4 Technical Drawings Rev AB Wolke m600 touch Operator Manual Sensor Figure 9 5 Sensor Dimensions...
