Rev AB
How to Set up Counters 6-23
Wolke m600 touch Operator Manual
Example: The first product batch is comprised of 50 packages:
Number of series 50 ƒ× The first 50 packages will be printed with the same
counter value (=batch number).
Counter Final Value
The counter counts up or down until this value is reached. The printer will
then either restart or stop printing depending on the 'reached final value'
setting.
Reached Final Value
When the Counter final value is reached, the
Reached final value
function
specifies what happens next.
Roll over counter: The counter starts again at the value specified under
Counter start value
.
Stop printer: Printing stops when the end value is reached.
Alarm Function
The
Counter alarm
is activated once the final value is reached.
Time field/Shift code
Time field will be set up in CLARiSOFT
®
.
Number of Shifts
During Commissioning number of shifts can be set up within the
CLARiTY
®
configuration. Refer to “Clarity System Configuration Guide”
for more details.
Barcode
Barcode will be set up in CLARiSOFT
®
.
Note:
The menu fields for the barcodes EAN13/UPC-A/-E/EAN8 and Code128/
EAN128 are identical and are explained together.
The following barcodes can be printed on the Wolke m600 touch:
• EAN8
• EAN13
• UPC-A
• UPC-E
Содержание m600 basic
Страница 1: ...Wolke m600 touch Operator Manual P N WLK462324 01 Revision AB March 2013...
Страница 75: ...Rev AB Password Protection 4 21 Wolke m600 touch Operator Manual Figure 4 22 Password Screen...
Страница 153: ...9 2 Technical Drawings Rev AB Wolke m600 touch Operator Manual Printhead Red Figure 9 2 Printhead Dimensions...
Страница 155: ...9 4 Technical Drawings Rev AB Wolke m600 touch Operator Manual Sensor Figure 9 5 Sensor Dimensions...
