Know Your Deep Fryer
6
•
Heating Element
•
Drain Lock
Assembled Fryer in
cooking position
•
Housing
•
Oil Pan Front
•
Frying Basket with folding handle
•
Basket clip with
MAX food level
•
Lid with viewing window and permanent filter
•
Oil pot with drain tap
•
Control Panel
•
Magnetic Release Power Cord
7
Assembling your Deep Fryer for Use
1
Place the Deep Fryer housing on a stable,
level surface.
2
Ensure that all components of your Deep Fryer are
completely dry prior to use to avoid risk of injury
due to spattering.
3
Insert the oil pot into the Deep Fryer housing
ensuring that the front of the pot (the front is
indicated by the tap) is placed at an angle into
the housing. (See figure 1).
4
Line up the control panel into the grooves
on the rear of the Deep Fryer housing. Your Deep
Fryer is equipped with a safety microswitch which
will not allow the control panel to work unless
it is properly seated into both grooves in the
housing. (See figure 2).
5
Add the appropriate amount of oil to the oil pot.
Do not fill with oil above the maximum level or
below the minimum level marked on the inside
of the Deep Fryer pot. (See figure 3).
6
Attach the Magnetic Release Power Cord into the
receptacle on the back of the housing. Only use
the approved receptacle marked
TA-35P
in your
unit. To attach the receptacle ensure that the nubs
on the magnetic end of the cord are on the right
side of the plug (TA-35P) in order to line up with
the plug receptacle on the Control Panel.
(See figure 4).
7
Unfold the basket handle and ensure that it is
locked into place. (See figure 5).
8
Place the basket into the basket holder inside the
pot. (See figure 6)
Using Your Deep Fryer
Basket in elevated position
for loading or food draining
figure 1
figure 2
figure 3
figure 4
figure 5
figure 6
