wolfappliance.com
|
21
TROUBLESHOOTING
Troubleshooting
OPERATION
Range does not operate.
•
Verify power is on.
•
Verify electrical power to range and home circuit breaker
is on.
•
Oven will automatically turn off after 12 hours of con-
tinual use, except in dehydration or Sabbath mode.
Clock display turns off.
•
Clock display is in standby power mode. Refer to
page 11.
OVEN
Oven temperature issue.
•
Contact Wolf customer care at 800-222-7820 for
recommendations.
No control knob display.
•
Pull temperature control knob out and reinsert fully. Turn
circuit breaker off for 5 seconds, then turn back on.
No response from oven control panel touch pads.
•
Turn mode selector knob to OFF to exit Sabbath mode.
•
Turn circuit breaker off for 5 seconds, then turn back on.
‘SAb’ displayed on
temperature
control knob.
•
Turn mode selector knob to OFF to exit Sabbath mode.
‘PF’ displayed on
temperature
control knob.
•
Unit had a power outage. Turn mode selector knob to a
cooking mode, then back to OFF to reset.
•
Turn circuit breaker off for 5 seconds, then turn back on.
‘OE’, ‘OC’ or other error displayed.
•
Contact Wolf factory certified service.
Oven ‘pops’ or ‘bangs’ during preheat or cool down.
•
Normal with new oven cavity expansion and contraction.
•
Run self-clean cycle. If it persists, contact Wolf customer
care at 800-222-7820.
INDUCTION SURFACE
Induction elements do not operate.
•
Verify power is on.
•
Verify electrical power to range and home circuit breaker
is on.
•
Induction surface is in lock mode. Touch and hold LOCK
for three seconds to unlock surface control panel.
•
Induction surface will automatically turn off after 2 hours
of continual use (high), 6 hours (medium) and 8 hours
(simmer).
Surface temperature issue.
•
Contact Wolf customer care at 800-222-7820 for
recommendations.
Содержание IR304PE/S/PH
Страница 1: ...Induction Ranges Use Care Guide ...
