Wolf IR304PE/S/PH, Инструкция по использованию и уходу

Страница: 18 / 23

18
|
Wolf Customer Care 800.222.7820
SURFACE OPERATION
Surface Operation
BOOST MODE
Boost mode boosts power on one element by diverting
power from an adjacent element. If the adjacent element is
on high, the power output will be reduced. The reduction in
power will be displayed on the power level indicator of the
adjacent element. Refer to the illustration below.
will
illuminate when an element is in boost mode.
Boost mode will deactivate automatically after approxi-
mately 15 minutes of continuous operation and can be
reactivated if desired.
BRIDGE ELEMENT
Setting controls:
1
To activate bridge, select desired power level on one of
the single elements.
2
Touch BRIDGE between corresponding element con-
trols to bridge elements front to back, BRG to bridge
elements side to side, or ALL BRIDGE to bridge all
elements. ,
or will illuminate respectively.
3
To change power level, adjust the power level on any
active bridged element.
4
To turn off, touch ON/OFF on any active bridged
element.
ALL BRIDGE should be used for cookware larger than
12"
(305)
in diameter. For smaller cookware, use the right
rear element.
GRIDDLE USE
The bridge element provides an oblong heating area for use
with a griddle, open roaster or fish poacher.
To preheat a griddle, set the bridge element power level to
high for five minutes, then reduce for cooking.
CAUTION
A griddle, open roaster or fish poacher should not be
used when the bridge element is off or with any other
combination of heating elements.
Boost mode.
BOOST