Multi-Function Cooktop Operation
9
wolfappliance.com
Control Panel
The control panel of your multi-function cooktop is illumi-
nated for an instant visual indication that the burner is in
use. It is a safety signal reminding you that the flame is on
and active.
CONTROL KNOB
It is normal for the control knob to be slightly raised above
the surface. This space is an air inlet necessary for good
combustion of gas. The knob rests on a valve stem with a
rubber grommet at the base. This design prevents liquid
spills from dripping into the controls below the burner.
Refer to the illustration below.
Surface Burner
A spark electrode ignites the surface burner. This control
eliminates the need for a continuous open flame pilot. For
added safety and convenience, the burner is designed with
an electronic reignition system. This feature enables the
burner to automatically relight in the event it is accidentally
extinguished.
FLAME HEIGHT AND APPEARANCE
Select a flame that is just high enough to maintain the
desired cooking speed and is sized to fit the base diameter
of the pan. Never extend the flame beyond the base of the
pan.
A natural gas flame should be blue with a deeper blue
core. There should be minimal trace of a yellow flame.
A yellow flame indicates an improper mixture of air and
gas or impurities in the gas supply to the cooktop. If this
occurs consistently, call Wolf factory certified service to
adjust the mixture. With LP gas, some yellow tipping
to the flame is acceptable and may not require an
adjustment.
MANUAL LIGHTING
In case of a power outage, you can relight the surface
burner manually. Turn the control knob to HIGH, then light
the burner using a BBQ lighter.
Touch control panel.
CONTROL
KNOB
AIR INLET
