manualshive.com logo in svg

Wolf CWL-2-400, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wolf CWL-2-400 Скачать руководство пользователя страница 24

i

with Plus pcb ( 

®

 Setting values appliance with Plus pcb page 49).

Changes can be carried out in the settings menu  .

Warning:

As changes in the settings menu can disrupt the proper functioning of the appliance,
changes of settings not described here require consultation with Wolf GmbH
Incorrect settings may seriously affect the proper performance of the appliance!

 

7.4

Factory settings

It is possible to simultaneously revert all the changed settings back to the factory settings.

All changed settings are then back to the values they had when they left the factory; all message and fault
codes are also deleted from the service menu.

Note

The filter message, however, is not reset!

For returning to factory settings, open the settings menu  .

Under appliance settings, the appliance can be returned to factory settings through step number 15.9.

Starting appliance

xxxx

24 | WOLF GmbH

7100833_202010

Содержание CWL-2-400

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды