Wohler AMP2-16V-M, Руководство пользователя

Страница: 46 / 172

Page 39
press Save/Exit.
3. Whenever you make menu changes and then exit to the Main Screen
without saving into a preset, a yellow warning flag will appear in the header
of the main screen to remind you to save the changes you make.
How Do I Quickly Recall Presets from the Main Screen?
While presets can always be recalled from the Recall Preset control on the
Configuration Selection Menu, pressing Recall Preset hot keys on the Main
Screen is an even more direct and quick way to
do it.
This is set up in one of the Hot Key Configuration Menus.
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys
Figure 3–18: Hot Key Configuration Menu
Hot Key 9 - 16 Configuration Menu
Save / Exit Help Cancel
Off
1 2 3 4 5 6 7 8
Selectable
Dolby Zoom
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
AES Out (4) Trim
AES Mic Channe... 29
Recall Preset
Press for Stat/Meta
Status/Metadata
Off
Dolby
Zoom
Key 7
Trim
Key 1
Rec 1
Key 5
Stat
Mdata
Downmix
Dnmix
Key 8
SDI Feed from Den... 24
Status/Metadata/Preset
Data
Pre
Key 2
LtRt LoRo
Auto
Mode
Automation On-Off
1. Turn the control associated with the hot key you want to be used to quickly
recall a preset that the long bar (not the control label) is highlighted. Press
the control until the Recall Preset or the Status/Metadata/Preset
function displays.
2. Turn the control to the number of the preset you wish the control to recall.
You can also set it to Selectable.
3. Now, on the Main Screen, that same control will recall a preset.