Page 101
5.
Pressing the knob and then rotating it adjusts the %FS. This value cannot be
adjusted to a number in excess of the calculated %FS. Rotating the knob
counter-clockwise reduces the %FS in 1% increments. It may not be
adjusted to less than 5%.
6.
Reference: Rotating this knob adjusts the display reference level. This
function is available on all scales except the AES scale.
7.
Upper Segment Color: Rotating this knob cycles the upper color of the
displayed sample level meter color through a wide variety of colors. Pressing
this knob allows you to adjust the division between the upper and middle
segments. Color boundaries are adjustable in 1 dB increments, and have the
same range as the bottom and top limits of the meter.
8.
Middle Segment Color: Rotating this knob cycles the middle color of the
displayed sample level meter color through a wide variety of colors. Pressing
this knob allows adjusting the division between the middle and lower
segments. Color boundaries are adjustable in 1 dB increments, and have the
same range as the bottom and top limits of the meter.
9.
Lower Display Color: Rotating this knob cycles the lower color of the
displayed sample level meter color through a wide variety of colors.
Monitor Mixer Configuration Menu
This menu allows you control the audio monitoring of each channel and to control
the phase displays for each channel pair. It also links to the Cluster Configuration
Screen, where you can configure the clustering of the channels on the Main Screen.
Configuration Selection
Menu
Main Screen
Menu
Configure
Monitor Mixer
Monitor Mixer
Configuration Menu
Содержание AMP2-16V-M
Страница 170: ...Page 163 Figure B 8 Deleting Stream Destinations...