Wohler AMP1-S8DA, Руководство пользователя

Страница: 46 / 76

8 21 03 0 : A MP x-S 8 S e r ie s U se r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
34
C h a p t e r 3 A u d i o C o n fi g u r a t i o n
Se t t i n g t h e M o n i t or ’ s S t a r t u p C o n f i g u r a t i o n
Setting the Monitor’s Startup
Configuration
You can configure the AMPx-S8 Series monitor to start up from a
powered-off state, and automatically begin monitoring a particular
input.
1. Press the
Fn + Setup
buttons.
2. Press the Down button until the LCD screens
Startup
Startup Startup
Startup
as shown
in Figure 3–13 below.
Figure 3–13 Startup Menu Option
3. Press the
Enter
button to display the
Startup
list.
4. Press the
Up
or
Down
buttons to scroll through the startup
options. Note that only those options that are available in your
system will show up in the list.
• Last Used
• Analog
• AES 1
• AES 2
• SDI 1 (not available on DA models)
• SDI 2 (not available on DA models)
5. Press the
Enter
button to make your selection and return to the
Setup Menu
.
6. Press the
Escape
button to return to normal operation.
848131 3.03
Setup: Startup
USO
RESTRITO