www.wobit.com.pl
Manual -SIC184 – 27.10.2014 – v.1.1
page 4
2.Main characteristic of the driver
SIC 184
is a programmable stepper motor driver with controlling current up to 4A. Except power
stage has also an indexer and trajectory generator, which enables precisely define position, velocity
and acceleration of motor motion. Programmed controller can perform program consist in 300
motion commend. Additionally controller can cooperate with incremental encoder, which allows for
better control of stepper motor position.
Except start/ stop inputs SIC 184 device has also 2 universal inputs, 2 outputs and dedicated inputs
based motor position. It allows completely eliminate PLC driver in some applications.
2.1.1 SIC184 driver as simple and cost-effective solution at controlling of stepper motor
SIC 184 Stepper motor servo controller allows to replace PLC controller and a stepper motor
driver in range of 0,2..0,4A.
Intuitive software in English facilitate programming of motion commands even by
inexperienced user.
The controller provides recording up to 300 motion command, which allows to execution
even complex motions. Additional digital inputs and outputs enable controlling of external
devices.
