WNT MNG rectangular Скачать руководство пользователя страница 19

 

_________________________________________________________________________________________ 

www.wnt.com 

 

 

 

 

XND.00016.012_A – 04/2018   

 

 

 

 

 19

 

1

 

User information  

1.1

 

Purpose of document, validity 

Installation instructions with operating instructions for the clamping device stated on the cover. 

These instructions are an integral part of the product supplied and contain important 
information for the safe installation, commissioning, operation, servicing and maintenance. 

These instructions must be read before using the product and must be observed during 
operation, in particular the "General safety instructions" section. 

1.2

 

Illustration of safety features 

 DANGER 

 

Indicates imminent danger. 
If the information is ignored, death or serious injury  
(permanent disability) will result. 

 

 WARNING 

 

Indicates a potentially dangerous situation. 
If the information is ignored, it is possible that death or serious 
injury (permanent disability) will result. 

 

 

WARNING 

 

Indicates a potentially dangerous situation. 
If the information is ignored, it is possible that material damage 
and light to medium injury will result. 

 

 

Information on useful tips or for preventing material damage 

 

NOTE 

 

 

 

Indicates general information, useful tips for users and work 
recommendations which do not impact on the health and safety 
of operators. 

 

… underscores useful tips and recommendations as well as 
information for efficient and trouble-free operation. 

 

Important for preventing more extensive material damage (alternative) 

 

CAUTION 

 

Indicates a potentially dangerous situation. 
If the information is ignored, material damage will result. 

 

… points out a potentially dangerous situation that can lead to 
material damage if it is not avoided. 

Содержание MNG rectangular


































Отзывы: