WMF 1300 S, Руководство пользователя

Страница: 125 / 136

125
User Manual WMF 1300 S
Appendix: Technical data
Appendix: Technical data
Technical data for coffee machine
External dimensions Width
Height
Depth
12.8 in (325 mm)
26.3 in (669 mm) (with bean hopper and lock —
without key)
22.6 in (574 mm)
Coffee bean hopper approx. 22.93 oz (650 g) each
(1
Coffee bean hopper in the center
approx. 19.4 oz (550 g)
(1
Powder hopper (optional) approx. 42.33 oz (1,200 g)
(2
Weight empty 77.16–92.59 lb/35–42 kg (depending on the model)
Water supply 3/8 inch hose connector with water mains tap,
and dirt filter with 0.003 in (0.08 mm) mesh size,
on-site.
(3
At least 29 psi (0.2 MPa/2 bar) supply pressure at
0.53 gal/min (2 l/min). Maximum 87 psi (0.6 MPa/
6 bar).
Important.
If the customer’s on-site flow pressure exceeds
87 psi (0.6 MPa/6 bar), then a pressure reducer
must absolutely be connected upstream and set to
a maximum of 87 psi (0.6 MPa/6 bar).
Maximum inlet temperature 95 °F (35 °C).
The set of hoses provided with the new coffee
machine, the permanent water connection kit, or
the new water filter must be used. Do not use the
old set of hoses.
Water quality For drinking water with carbonate hardness from
5 °dKH (5 gpg) or higher, a WMF water filter must
be fitted.
Water drain tube (optional) Hose a minimum of DN 19, minimum downward
slope of 0.02 in/in (2 cm/m)
Use at elevation above
sea level < 6.562 ft
We reserve the right to make technical modifications.
(1
The capacity depends on the size of the coffee beans.
(2
Only with optional powder hopper. The capacity depends on the powder used.
(3
These specifications (IEC 60335–2-75) for the water connection to the coffee machine apply in EU member
states. It may be necessary to also observe additional country-specific regulations. Outside the EU
countries acceptance of the standards quoted is to be checked by the legal entity or natural person who
wishes to use the coffee machine.