64
Figure 3.5-5 Holiday Schedule
Step 2
, Select date to set as holiday. The selected date will be highlighted in yellow.
Step 3
,
Check “Record/Snapshot”, click “Save”. System prompts it is successfully saved.
Step 4
,
Check “Record Schedule/Snapshot Schedule” interface, click setup next to “Holiday”, and refer to setup
of “Monday to Sunday”.
Step 5
,
Complete setup of “Holiday”, then it records/snapshots according to date set in holiday schedule.
3.5.2 Destination
3.5.2.1 Path
Path can configure storage path of device record and snapshot. There are three options: Local SD Card, FTP and
NAS. You can only select one mode. System can save according to the event types. It is corresponding to the
three modes (general/motion/alarm) in the schedule interface.
Please check the box to enable the save functions.
Step 1
,
Select “Setup > Storage > Destination > Path”.
The system will display the interface of “Path”, which is shown in Figure 3.5-6.
Figure 3.5-6 Path
Step 2
, Configure info of each parameter according to the actual needs; please refer to Table 3.5-1 for details.
Parameter
Description
Event Type
It includes: scheduled, motion detect and alarm.
Local
It is saved in the SD card.
FTP
It is saved in the FTP server.
NAS
It is saved in NAS server.
Table 3.5-1 Path Parameter Description
