WITTUR sematic SDS Rel. 3, Инструкция по эксплуатации

Страница: 24 / 45

24
www
.wittur
.com
© WI
TTUR • All rights r
eser
ved
PM.2.004921.EN - 808-001-000 SDS
©
rel 3 · Edition 22 July 2020
Drive - Instruction Manual
5.6 CONTROLLER SETTING FOR SDS DC-PWM
Param. codes Default SEMATIC Parameter Range Note
04 To be set as for door configuration KN Input 00, 01, 02 00 --> Default
01 --> Partial reopening
02 --> Machanical safety edge
05 To be set as for door configuration Car door locking
device
00, 01 00 --> Off
01 --> On
06 To be set as for door configuration Glass heavy door 00, 01 00 --> Off
01 --> On
19 01 Fire Fighting Mode 00, 01 00 --> Reversing system off
01 --> Reversing system reduce sensi-
tivity
22 To be set as for door configuration Closing rotation 00, 01 00 --> Clockwise
01 --> Anticlockwise
25 00 Parking Mode 00, 01 00 --> Clutch closed
01 --> Clutch open
26 To be set as for door configuration Clutch Type 00, 01, 02 00 --> Alu clutch standards (STD)
01 --> Expansion clutch (EXP)
02 --> Expansion clutch (EXP-B)
99 To be set as for door configuration I/O Interface 00, 01, 02 00 --> Default type
01 --> Loni-BV type
02 --> TX-R5
Default profiles
50% 75% 100% 125% 150%
Opening Parameters High Speed (Pc10) 30% 40% 50% 70% 90%
Low Speed (Pc11) 50% 50% 50% 50% 50%
Comfort (Pc12) 99% 90% 80% 70% 60%
Low speed end
(Pc64)
50% 50% 50% 50% 50%
Closing Parameters High Speed (Pc13) 30% 35% 35% 50% 60%
Low Speed (Pc14) 16% 16% 16% 16% 16%
Comfort (Pc15) 99% 99% 99% 90% 90%
Rev. force setting Max 150 N 150 N 150 N 150 N 150 N
Set (Pc09) 130 N 130 N 130 N 130 N 130 N
Min 110 N 110 N 110 N 110 N 110 N
-
Rev. Offset setting 100% 100% 100% 100% 100%
Standard Doors Heavy Doors
PROFILE SETTING Clutch space 90mm (EXP
type)
Clutch space 120mm
(EXP-B type)
Clutch space 90mm (EXP
type)
Clutch space 120mm
(EXP-B type)