The WITTI logo and BEDDI are trademarks of D&S Creation Limited. All other trademarks are properties of their respective owners.
Assembled in China www.wittidesign.com ©2017 D&S Creation Ltd. All Rights Reserved
Page: 4/6
Limited Warranty 1 year. http://www.wittidesign.com/warranty
FM Radio
Please plug in the provided FM Antenna cable into the AUX/FM port in the back of the BEDDI Glow before
using the FM Radio. You can use the app to scan the available channels. Then you can select your favorite
station from the list. This favorite station can be used as your alarm sound, and will be the station played
when you switch on FM Radio.
You can use the app to switch to FM radio mode, or assign a smart button to turn on FM radio. To turn off
FM radio, you can switch back to Bluetooth mode via the app, or press the “play/pause”
button on BEDDI Glow.
Modify Ration Stations (Support on Firmware v2.1.5 or later)
You can add, remove a specific channel via the BEDDI app.
Mood Light
This feature can be controlled with the app and there are various light effects to choose from. For example,
if you select “Music Light”, the mood light will react and change to the music you are playing. You can also
assign a Light mode button to turn the Mood Light on/off.
Nap/Sleep Mode
You can use the Nap or Sleep mode via the app, or assign the smart button to activate them. Pressing the
smart button will cycle through the interval 4 times and then turn off .
For Nap, after the set time has concluded, the default Beep alarm sound will be played.
For Sleep, after time is up, the audio which is currently playing will be stopped.
Phone Finder
You can assign the smart button to find your phone. The phone will play a beeping sound. Please note that
the phone must be within Bluetooth range (i.e., 15m) of BEDDI Glow, and the BEDDI app must be active in the
background for this feature to work.
Playing music
Once you have connected your phone to BEDDI Glow via Bluetooth audio, you can use any music player to
play music via BEDDI Glow
Third Party Service
To control other 3rd party services, you need to setup each service individually under
Setting -> Service/Login. Once you have provided the necessary information, you can assign a smart button
to perform a task for that 3rd party service.
