WITRN Qway U2, Руководство пользователя

Страница: 65 / 66

Precautions:
*
U2 working voltage can not exceed 24v,
current can not exceed 5a over-range use
will burn equipment and lose maintenance
value
*
When using an external sensor to measure temperature, it
cannot exceed the range.
*
U2 Since there are up to 6 usb interfaces, when the fast charge
trigger mode or the high voltage fast charge mobile phone is
charging, the power and - poles of several usb
interfaces are in parallel state, and the high voltage is output at
the same time: Do not use other USB ports to connect other
devices. The high-voltage output burns the device at your own
risk!
*
The hid usb power supply for computer connection is isolated
from other power supplies and poles, so the computer connection
can be safely connected when the high voltage is fast.
*
The connection to the computer must be connected to the other
port through the hid usb port. The other ports cannot be
connected to the computer. Other ports have high voltage
output and burn the computer!
*
U2 In the automatic detection protocol or mtk, vooc deception
and other conditions that require current modulation for
deception, the internal adjustable load will be activated to
discharge, and the system will heat up, which is normal.
Safety warning: u2 detects the protocol that requires current
modulation such as mtk when performing the automatic
detection protocol. It needs to start the internal load and it will
generate high temperature. Do not touch it at this time.
The lower right corner of u2 (beside the type-c output port) to
prevent high temperature burns
65
/
44