Withings ScanWatch Series, Инструкция по установке и эксплуатации

Страница: 87 / 104

EN - 87
ScanWatch
v1.0 | August, 2020
• Humidity, cosmetic products, and abrasive chemicals (such as cleaning agents
or insect repellent) can damage your wristband.
Woven wristbands
• Wipe down the band with a lint-free cloth. You can lightly dampen the cloth
with water.
• Woven wristbands are not water-resistant.
• Woven wristbands should not be worn during workouts.
• Light-colored Woven wristbands: avoid direct contact with dark-colored
clothing as color transfer may occur.
• Sunlight, humidity, cosmetic products and abrasive chemicals (such as
cleaning agents or insect repellent) can damage your wristband.
Important notes :
• The wristband’s color tends to fade over time.
• Your wristband should be cleaned regularly.
• Moisturizers, soaps, and sweat residues can cause skin irritations.
• In case of skin irritation, we advise you to get in touch with a dermatologist
before you put your ScanWatch back on.
Charging the battery
Your ScanWatch can operate for up to 30 days on a single charge, depending
on your use of the heart rate mode. To charge your ScanWatch, perform the
following steps:
1. Connect the USB end of the charging cable to a power source.
2. Position the other end of the charging cable on the back of your ScanWatch in
such a way that the magnets align.
You can check the percentage of the battery on the display of the watch while
it’s charging.