Withings ScanWatch Series, Инструкция по установке и эксплуатации

Страница: 37 / 104

EN - 37
ScanWatch
v1.0 | August, 2020
Activating the Quicklook
The Quicklook feature allows you to light up the screen of your ScanWatch
without pressing the crown. To do so, simply raise your wrist and turn it towards
you.
The Quicklook feature can be activated or deactivated in the Settings menu of
your ScanWatch. To do so, press the side button and scroll to the
Settings
menu.
Press the button to select the Settings menu and scroll to the Quicklook.
The Quicklook feature can also be activated or deactivated in the Health Mate
app . To do so, go on with the following steps: Open your Health Mate app and tab
Devices
. Tap
All settings
. Enable Quicklook in Display Options.
Note
: If the watch detects that you’re asleep, the Quicklook is automatically
deactivated. It will reactivate shortly after you wake up.
Setting the display brightness
You have the possibility to set manually or automatically the display brightness of
your ScanWatch. To do so, perform the following steps:
1. Open the Health Mate app.
2. Go to
Devices
.
3. Scroll to your ScanWatch.
4. Select
More Settings .