Withings Move ECG, Инструкция по установке и эксплуатации

Страница: 42 / 55

EN - 42
Move ECG
v1.0 | August, 2019
Cleaning and maintenance
Cleaning my watch
1. Use a lint-free cloth moistened with water to clean the glass and casing of
your Move ECG.
2. Run the silicone band under water and rub it with hypoallergenic soap to clean
it.
3. Dry the silicone wristband with a soft cloth.
Replacing the battery
The battery needs to be replaced when the hands stop moving and when the
watch no longer vibrates when you press the button. The Move ECG will run for
approximately 12 months on a standard watch battery.
We recommend to go to a watchmaker if you want to install a new CR2430
battery. If the time does not seem correct after replacing the battery, you may
need to recalibrate the hands of your Move ECG.
Refer to
“Calibrating the hands” on page 43 for more information.
Replacing the wristband
You can easily replace the wristband of your Move ECG thanks to the quick
release spring bars with which it is attached.
To change the wristband, perform the following steps:
1. Turn your Move ECG over.
2. Locate the knob of each spring bar.
3. Pull the knob of the first spring bar to the left side and remove the wristband.