www.witeg.de
witeg Labortechnik GmbH, WCB Circulation Water Bath
20
6 Job description
6.1 Menu structure
6.2 Set turn-off delay
The turn-off delay timer serves as automatically stop function. It turns off the heating after the
timeframe you set is elapsed.
Use Mode button to reach next menu without setting a delay time.
The delay time is adjustable from one minute till over 99 hours (00:01 - 99:59) in one
minute steps.
Turn the Jog-Shuttle knob to set your delay time. Push the Jog-Shuttle if you reached the
desired value to confirm it. With the confirmation the timeframe starts elapsing.
If you want to change the value after confirmation, you have to push the Jog-Shuttle once
again. The PV initiates blinking and you can modify the value again.
To confirm the value and start the delay time push the Jog-Shuttle yet again.
6.3 Set turn-on delay
The turn-on delay timer serves as automatically start function. It turns on the heating after
elapsing of the timeframe you set.
To reach this sub menu item you have use the key combination (look at 3.3) in the menu
“set turn-off delay”.
LCD shows “d-tr”.
The delay time is adjustable from one minute till over 99 hours (00:01 - 99:59) in one
minute steps.
Turn the Jog-Shuttle to choose your desired value and probate it by pushing the
Jog-Shuttle. The delay time starts to run by probating the value.
If you want to change the confirmed value, you have to push the Jog-Shuttle once again.
Set turn-off delay
Set temperature
Key lock
Set turn-on delay
Main switch
„On“
Key combination
6
2
3
4
1
Key combination
Justify
5
