MRKxx - EXP3 installation
rev.01
MRK
XX
–
EXP3-SC
INSTALLATION
WARNINGS
:
•
This wireless electronic equipment must be disassembled and
serviced only by qualified electrical personnel.
•
Take electrical precautions before starting to work.
•
use components with the same specifications.
•
Customer is the only responsible for any damage occurred by improper service.
The aim of the following document is to give the instruction to install the expansion board EXP3 on
MRK980 or MRK16.
NOTE: the installation is possible on all MRK16 but only on MRK980-EX0 version. The EX0 version
can be recognized from the code EX0 on the product label and from the small black metal panel on
the rear panel.
EX0
small black metal panel
