Wisstar WP-N6516-M2-16P, Руководство пользователя

Страница: 103 / 195

Network Video Recorder User Manual
102
You must select the channel(s) in Trigger Channel settings you want to trigger full screen
monitoring.

Audible Warning
It will trigger an audible beep when an alarm is detected.

Notify Surveillance Center
It will send an exception or alarm signal to the remote alarm host when an event occurs. The
alarm host refers to the PC installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when remote alarm host is
configured.

Send Email
It will send an email with alarm information to the user when an alarm is detected.
Please refer to 14.8 Configure Email for details of Email configuration.
Check the checkbox to select the alarm output when an alarm is triggered.
To trigger an alarm output when an event occurs, please refer to Chapter 11.6.3 Configure Alarm
Output to set the alarm output parameters.
Click Trigger Channel and select one or more channels which will start to record/capture or
perform full-screen monitoring when motion alarm is triggered.
You have to set the recording schedule to realize this function. Please refer to Refer to Chapter 8.4
Configure Recording Schedule for settings of the recording schedule.
Click Apply to save the settings.
Configure Motion Detection Alarm
The motion detection enables the device to detect the moving objects in the monitoring area and
trigger the alarm.
Go to System> Event>Normal Event>Motion Detection.