General safety and operating information applicable to electrical equipment installed within
hazardous locations. This information must be understood by all persons installing, using, or
maintaining the electrical equipment. This information is designed to aid personnel in safe
installation, operation, and maintenance of the “
TNO-X
nnnn
EPT1-Z
" Series equipment. It is not
designed to replace or limit appropriate safety measures applicable to work performed by
personnel. Any additional safety and operating measures that are required must be determined by
and followed by personnel performing work on the electrical
equipment.
WARNING: Deviation from the specified instructions or procedure steps can
result in injury to personnel, equipment malfunction or equipment damage.
WARNING: Return unit to factory for any repairs or replacement of parts,
customer not permitted to repair. This will void all warranties and hazardous area
certification(s) if unauthorized repair occurs.
General Precautions:
Slip resistant gloves and protective eyewear (glasses with side shields or goggles as appropriate)
should be worn when installing and servicing any part of electrical equipment. Hot components
should be allowed to cool before servicing if possible. Other appropriate equipment or clothing must
be used as required by the type of work performed. All applicable regulations and procedures must
be followed for the work performed. Before beginning any work on the equipment, carefully consider
all the potential hazards and ensure that appropriate measures are taken to prevent injury to
personnel or equipment damage.
CAUTION: Failure to allow adequate cooling of electrical equipment components with
hot surfaces before opening the enclosure can lead to injury of personnel or equipment
damage.
CAUTION: Electrical equipment components may be hot even when power is not
applied. Take appropriate precautions to prevent injury from contact with hot items.
General Safety and Operating Information:
9
Содержание TNO-X6072EPT1-Z
